Surface Preparation
Prepare the surface by sanding with emery paper. First thinned the Glorious Red Oxide Primer to obtain brushing consistency by using Thinner. Apply a single coat and allow to dry.
After first coat for smoothen surface used Glorious Synthetic Putty to fill dents of Surfaces than allow it to dry. Now apply second coat of Glorious primer to avoid patchy appearance. Sand with emery paper before application of topcoat with Glorious Enamel Paint. It is recommended on rough metal surfaces like steel furniture, Castings, Vehicles, etc. to give protection against corrosion.
PERFORMANCE GUIDE
- Weather: Excellent when used with approved top coat.
- Heat : Up to 120°C. Prolonged exposure to 120°C will cause embrittlement.
- Water : Excellent when used with approved top coat.
- Solvent : Resists alcohol and hydrocarbons. Film is liable to attack from other strong solvents.
- Abrasion: Good resistance to abrasion.
- Acid : Fair.
- Alkali : Fair.
Technical Data
- Coverage** : On Smooth non absorbent surface. 100 – 140 sq. ft/Ltr/coat. @ 25 micron DFT
- Supply Viscosity@30°C : 100-140 sec. by B4 cup(IS-3944)
- Specific Gravity @30°C : 1.30(+ 0.05) @30°C
- Drying Time : Surface Dry : 2-3 Hrs.
- @ 30°C & RH 60 ± 5% : Recoating : 6-8 Hrs.
- Finish : Smooth & Matt
- Recommended Thinning : Up to 20% by volume using Glorious General Purpose Thinner (Avoid extra thinning for better results.)
- Flash Point : Not below 30°C
- Stability of Thinned Paint : Use within 24 hrs.
- Shelf-life : 1 year from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat.
- Applications : Steel Furniture, Castings, Vehicles & Metal Surfaces.
**Actual coverage may vary depending on Method & Condition of Application, Surface Roughness & shade.
Precautions
- Store in well ambient conditions, Ventilated locations & away from the source of ignition and fire.
- Keep away from children.
- In case of eye/skin contact washes with plenty of water.
- Inhalation / Injection will cause danger. In case move to fresh air & consult medical practitioners in both the cases.
- Do not apply when ambient temperature might drop to level below 10°C within 4 hrs of application.
- Avoid extra thinning for better results.
- The container must be tightly closed when not in use. Stir well and strain before use.
- Use safety equipments like rubber or polythene gloves, safety goggles / glasses & face mask.
Safety Features
Non-Flammable.
Pack Sizes
1 Ltr., 4 Ltr., 10 Ltr. & 20 Ltr.
Customer reviews
Reviews
There are no reviews yet.
Write a customer review