Synthetic Enamel

Unique Features & Benefits

• Excellent durability
• Ease of Application
• Good Corrosion Resistance
• Super silky and Semi Glossy finish.
• Excellent flow characteristics to form smooth and uniform finish
• Excellent color and color retention
• Excellent coverage

Surface Preparation

All surfaces should be thoroughly cleaned before painting. Loose and flaking paints should be removed by wire brushes and sure that there is on any greases or oil present on surface. Use clean brushes which were wash with suitable thinner.
Before application of Glorious Enamel first apply Glorious Primer & Putty for better performance. Enamel paint must be thinned by using thinner to obtain brushing consistency for better application. Allow first coat to dry before applying another coat. It is recommended on wooden surfaces like doors, windows, cabinets; on metal surfaces like grills and gates, and on masonry and metal surfaces. It gives Glossy smooth finish.

Technical Data

• Coverage**: On Smooth nonabsorbent surface. 140 – 180 sq. ft/ltr/coat.
• Supply Viscosity @30°C : 120-160 Sec. by B-4 cup(IS-3944)
• Specific Gravity @30°C : 0.95 – 1.10 (Dependent on shade)
• Volume Solid% : 45 – 55 % (Dependent on shade)
• Drying Time : Surface Dry: Max 2 hrs.
• @30°C & RH 60 ± 5% : Recoating : Min. 8 hrs.
• Finish : Smooth & Glossy
• Recommended Thinning : Up to 20% by volume using Glorious General Purpose Thinner & For one coat finish up to 10% by volume using Glorious General Purpose Thinner
• Flash Point : Not below 30°C
• Stability of Thinned Paint : Use within 24 hrs.
• Shelf-life : 1 year from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat.
• Applications : Wood, Metal & Walls Surfaces for Interior & Exterior

**Actual coverage may vary depending on Method & Condition of Application, Surface Roughness & shade.

Precautions

• Store in well ambient conditions, Ventilated locations & away from the source of ignition and fire.
• Keep away from children.
• In case of eye/skin contact washes with plenty of water.
• Inhalation / Injection will cause danger. In case move to fresh air & consult medical practitioners in both the cases.
• Do not apply when ambient temperature might drop to level below 10°C within 4 hrs of application.
• Avoid extra thinning for better results.
• Can be tinted with Universal Stainer before thinning. Do not add more than 5% of Universal Stainer, Stir well tinted paint after tinting & before application.
• The container must be tightly closed when not in use. Stir well and strain before use.
• Use safety equipment’s like rubber or polythene gloves, safety goggles / glasses & face mask.

Safety Features

Flammable.

Pack Sizes

500 ml, 1ltr, 4ltr & 20ltr.

Shade Range

As per shade card & Customer Requirements.